All parts are genuine Toyota parts unless noted as "After market" (Non- Genuine Toyota made part)
If you do not see what you want please ask!
My price list basically reflects what most people ask for.
So if you don't see it on my list, it does not necessarily mean it is not available.
My Payment options are listed at the bottom of this page or just click here
Send your email to: rick@toyheadauto.com
Click Here For Toyota Performance Parts
Stout
Pick-Up 1964-1967 Parts.
Please inquire, I have some parts and sources available for Stout. E mail: rick@toyheadauto.com
Toyota Truck:
Weatherstrip
Windshield Weatherstrip (to seal front glass) Toyota truck, has groove for trim insert 5/72 to 7/78, RN2# aftermarket reproduction $127.92
Windshield Weatherstrip (to seal front glass) Toyota truck 1986-88 DLX or SR5 $51.91
Windshield Weatherstrip (to seal front glass) Toyota truck 1986-88 Standard model $74.45
New!!! Windshield Insert Trim, Aftermarket (cut to fit) universal kit. Enough to do one rear or one front windshield. $61.53
Door weatherstrip/ seal (goes around the door itself) Pick-Up 1972-1979 $49.58 ea.
Door weatherstrip/ seal (goes around the door itself) Pick-Up 1979-1983 $54.38 ea.
Door weatherstrip/ seal (goes around the door itself) Pick-Up 1984-1995 $54.38 ea.
Exterior / Body:
New!!! Windshield Insert Trim, Chrome plastic trim. Aftermarket (cut to fit) universal kit. Enough to do one front or rear windshields. $61.53
New!!! Windshield Front (new old stock, only 2 left) Stout 1967 $518.70
Front Turn Signal Lens Hilux Pick-Up 1969-72 Comes with rubber gasket. $22.14 each
Antenna Replacement Kit, for Toyota Pickup truck 8/80 to 7/83 RN34 aftermarket, very similar to the original desingn.
This antenna is telescoping (3 sections). 38 inches extended. $24.50
Fuel door lock assembly 1989 Toy Truck $58.18
Rocker panal (after market sheet metal) Pick-up truck 1972-1978 $39.75 each.
Lock Set, complete matching set , doors, rear door, fuel door and ignition $145.00
New!!! Lock Set for Toyota Pick Up, complete matching set, ignition lock and doors. Includes two keys $105.60
Hood Adjustable Rubber Bumper Fits most Toyota trucks 1969 to current $14.45 each
Front Side Marker Assembly Pick-up Truck 5/72 to 7/78 RN2#, whole assembly comes with bulb, socket, lens and all. aftermarket reproduction $67.60 each
Front Side Marker Assembly Land Cruiser 70 to 75, whole assembly comes with bulb, socket, lens and all. aftermarket reproduction $67.60 each
Front Turn Signal Lens, Pick-up Truck 5/72 to 7/78 (right side available only) $16.67
New!!! Speedometer Drive Cable 1975 Celica (goes from trans to back of speedo makes M.P.H. needle work) $37.92
Interior
See my Dashboard repair kits. Click Here!
Headrest 1998Tacoma
Ignition Starter Switch (part behind the ignition lock and key) switch, wires and plugs. Toyota truck 1972-1978 $77.41
Engine Compartment, Suspension, Drive train and More:
* A $30.00 core charge must be added to the price and is refundable in exchange for your old carburetor.
New!!! Piston Set with Rings Complete for 20R and 21R Engines 1974 to 1980 1.00 mm over sized $280.00
This exhaust manifolds are Toyota warranty replacement kits. These come with the inner and outer updated ventilated heat shields. Gaskets, manifold, instructions and new head studs.
These are of improved design and are guaranteed not to crack. They are the only way to cure the cracked warped manifold problem common to the old design
(please note the picture is of a dual outlet, the single outlet comes with all the same stuff).
This exhaust manifolds are Toyota warranty replacement kits. These come with the inner and outer updated ventilated heat shields, gaskets and longer studs. These are of improved design and are guaranteed not to crack. They are the only way to cure the cracked warped manifold problem common to the old design.
Your head will now slide down on these studs then fasten with nuts (like a funny car motor). Cylinder head stud kits are precision centerless-ground and thread-rolled to Mil-S-8879 specs (many times stronger than OEM). Their black oxide finish protects them from wear and corrosion, and ARP throws in hardened parallel washers for uniform load distribution and accurate torque readings.$164.34
Super Strong Crank Shafts Main Bearing Bolts (stud) Kit. For 20R, 22R and 22RE motors. These main studs are made from 8740 chromemoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs (many times stronger than OEM), with a black oxide finish for corrosion resistance. The kits come complete with ten studs, hardened washers and high-strength hex nuts. $105.46
Super Strong Fly Wheel Bolts. For 20R, 22R and 22RE motors. These high performance flywheel bolts are forged from an aerospace alloy and heat-treated before machining and thread rolling. They have a larger-than-stock shank diameter for improved flywheel register, and are rated at 170,000 psi. $53.17
Sway Bar bushings, Landcruiser (Front) from 1988-1989, Landcruiser (Rear) from 1985-1987, and
Pick-up (Front) from 1980-1983. $20.00 pair
Electric Fuel Pump Kit After market (mounts inside gas tank like original, similar design) Toyota pickup 1975 to 1979 20R engine. $101.45
Electric Fuel pump After market. For carburated cars only. Mounts externally, comes with instructions (fuel pressure 4.5 psi out put) A low cost alternative to replacing the original fuel pump $56.42
Clutch slave cylinder, Toyota Truck 1975-80 $34.96
Cool Look!! Distributor Electronic Conversion Kit for all Toyota 4 cylinder Single Point type motors 1971-1977
NEVER CHANGE POINTS AGAIN! Saves gas and extends the life of your spark plugs. Come with a magnetic pick up you screw inside the distributor. This kit eliminates the unreliable points that ware and constantly change the ignition timing. With this kit you just set it and forget it!!!! Its is easier to install than as a set of points but you only do it once! Entire ignition system fits beneath distributor cap to maintain original look. No alteration to distributor required. Use on vehicles with points-type ignition. CARB EO #D-57-1. $123.00
Entire Electronic Distributor for 20R motor $184.28
Ignitor Box Booster (aftermarket) multiple spark ignition control for primarily stock applications. Gives a better more powerful spark at any rpm. These inductive discharge ignitions I sell are designed to produce a series of sparks below 3,000 rpm, instead of just one. This ensures that fuel is burned completely, providing more power, smooth idle, quick starts, and overall drivability improvements. This ignition boxe can be triggered using points. Comes with wires connectors and detailed instructions. Price $149.76 This unit will not work with distributors with magnetic pick ups. See other unit listed below for cars with magnetic pick ups.
A REAL GAS SAVER!!! Ignitor Box, Multiple Spark Discharge Ignitions System. Can be used to Eliminates the ignitor unit that is located on top of the ignition coil and give a better more powerful spark at any rpm. The original Toyota ignitor is discontinued new and sold for close to $300.00 Whether you have a powerful street machine, daily stock driver or trick Street Rod, the multiple sparks of the 6A CD ignition will ensure complete combustion. Bolt one on and look for quicker ETs, easier starting, reduced plug fouling, quicker revving, more power, and increased fuel economy. This work with virtually any 4, 6, or 8-cylinder vehicle with a distributor, This unit can be triggered by breaker points, magnetic pickup, or the output of an electronic amplifier.
$228.75 standard unit
$288.75 with special motor saving adjustable rev limited built in.
Ignition Coil Upgrade Blaster coil 15,000 more volts than stock.
Blaster coils put out 45,000 volts, which are 15,000 more than stock.
They also have an oil-filled metal canister and will fit stock mounting brackets. $56.58
Brake Master Cylinder complete assembly for Toyota Stout (truck) $113.62
NEW!!!Filter Kit For A40 Automatic Transmission Comes with filter and gasket $23.19
-------------------
Get about 3-6 extra HP by eliminating the original, heavy belt driven clutch fan just by installing this kit.
Can be wired up to operate manually or automatically with the additional kits listed below. Price $144.38
Thermostatic Fan Switch for above fan kit. Automatically turns on fan when engine temperature reaches 185 degrees Fahrenheit. $72.48
Thermostatic Fan Switch Adjustable. Same as above but can be adjusted to switch on from 140 to 200 degrees Fahrenheit $93.67
Please inquire, I have some parts and sources available for Stout. E mail: rick@toyheadauto.com
Toyota Truck:
Weatherstrip
Windshield Weatherstrip (to seal front glass) Toyota truck, has groove for trim insert 5/72 to 7/78, RN2# aftermarket reproduction $127.92
Windshield Weatherstrip (to seal front glass) Toyota truck 1986-88 DLX or SR5 $51.91
Windshield Weatherstrip (to seal front glass) Toyota truck 1986-88 Standard model $74.45
New!!! Windshield Insert Trim, Aftermarket (cut to fit) universal kit. Enough to do one rear or one front windshield. $61.53
Door weatherstrip/ seal (goes around the door itself) Pick-Up 1972-1979 $49.58 ea.
Door weatherstrip/ seal (goes around the door itself) Pick-Up 1979-1983 $54.38 ea.
Door weatherstrip/ seal (goes around the door itself) Pick-Up 1984-1995 $54.38 ea.
Exterior / Body:
New!!! Windshield Insert Trim, Chrome plastic trim. Aftermarket (cut to fit) universal kit. Enough to do one front or rear windshields. $61.53
New!!! Windshield Front (new old stock, only 2 left) Stout 1967 $518.70
Front Turn Signal Lens Hilux Pick-Up 1969-72 Comes with rubber gasket. $22.14 each
Antenna Replacement Kit, for Toyota Pickup truck 8/80 to 7/83 RN34 aftermarket, very similar to the original desingn.
This antenna is telescoping (3 sections). 38 inches extended. $24.50
Fuel door lock assembly 1989 Toy Truck $58.18
Rocker panal (after market sheet metal) Pick-up truck 1972-1978 $39.75 each.
Lock Set, complete matching set , doors, rear door, fuel door and ignition $145.00
New!!! Lock Set for Toyota Pick Up, complete matching set, ignition lock and doors. Includes two keys $105.60
Hood Adjustable Rubber Bumper Fits most Toyota trucks 1969 to current $14.45 each
Front Side Marker Assembly Pick-up Truck 5/72 to 7/78 RN2#, whole assembly comes with bulb, socket, lens and all. aftermarket reproduction $67.60 each
Front Side Marker Assembly Land Cruiser 70 to 75, whole assembly comes with bulb, socket, lens and all. aftermarket reproduction $67.60 each
Front Turn Signal Lens, Pick-up Truck 5/72 to 7/78 (right side available only) $16.67
New!!! Speedometer Drive Cable 1975 Celica (goes from trans to back of speedo makes M.P.H. needle work) $37.92
Interior
See my Dashboard repair kits. Click Here!
Headrest 1998
Ignition Starter Switch (part behind the ignition lock and key) switch, wires and plugs. Toyota truck 1972-1978 $77.41
Engine Compartment, Suspension, Drive train and More:
Grand Slam Special!!! Cylinder Head for 2.4L 22R and 22RE, 1985 to 1995 Pick up and 4Runner.Carburetors for all motors, (rebuilt by Toyhead Auto) $175.00*
Complete with all new parts. Not a rebuild, these are new with no core required. Only $456.00
Cam No. 801-272 “The Cheater Cam” for 20R, 22R and 22RE Engines $116.45
This is a new regrind, It it is street legal and legal in "stock lift" racing classes. The duration is what gives you the huge advantage over
the stock camshaft. The specs are 220’ duration @ .050 .410 lift. Rpm range 1500-4800 during the crucial torque area. No new springs needed,
we recommend new rocker arm when installed and your good to go. No problems with passing emissions or idle, this is about as good as it
gets when it comes to performance and still being able to pass. This cam is the best you can get for the stock 22RE fuel injection.
Any bigger a cam and the sensors for the stock EFI will make the motor run poorly.
Master Engine Gasket Kit 20R. Contains all the gaskets you need for a complete rebuild. $117.64
Master Engine Gasket Kit 22R , Contains all the gaskets you need for a complete rebuild $118.62
NEW! Master Engine Gasket Kit for 22RE (Full Upper and Lower Set) all the gaskets you need for a full rebuilt $97.38
* A $30.00 core charge must be added to the price and is refundable in exchange for your old carburetor.
NEW!!!Carburetor Rebuild Kit for ALL 20R, & 21R motor factory ASIAN brand carburetors.Engine Gasket Master Kit, Contains all the gaskets for full rebuild complete for 22R. $118.62
Comes with all gaskets, rubbers, O-ring seals, power and accelerator pump diaphragms and plungers. Clips, spring and pin
hardware. Comes with instructions for adjustments and more. $63.35
New!!! Piston Set with Rings Complete for 20R and 21R Engines 1974 to 1980 1.00 mm over sized $280.00
Exhaust Manifold (Remanufactured) for 8R and 18R-C motors. Exclusively refurbished for Toyhead Auto Restoration Services. These manifold are guaranteed to fit nicely with no problems. All good tread inserts and studs. The mounting surface to the head has been precision milled for a flush fit. $377.00Upgraded Exhaust Manifolds for the 20R & 21R Engines, early & non CA single flange outlet $236.34
Exhaust Manifold Hardware and Gasket Kit for above 8R and 18RC Exhaust and Intake Manifold installation. Comes with nuts, bolts and gaskets $73.47
This exhaust manifolds are Toyota warranty replacement kits. These come with the inner and outer updated ventilated heat shields. Gaskets, manifold, instructions and new head studs.
These are of improved design and are guaranteed not to crack. They are the only way to cure the cracked warped manifold problem common to the old design
(please note the picture is of a dual outlet, the single outlet comes with all the same stuff).
Exhaust Manifold Kit 20R, late, dual flange outlet $217.14Upgraded 22R Exhaust Manifolds for the 22R motor, $217.47
These exhaust manifolds are Toyota warranty replacement kits.These come with the updated vented heat shields
and inner and outer gaskets along with longer studs and are of improved design. The only way to cure the cracked / warped manifold problem.
This exhaust manifolds are Toyota warranty replacement kits. These come with the inner and outer updated ventilated heat shields, gaskets and longer studs. These are of improved design and are guaranteed not to crack. They are the only way to cure the cracked warped manifold problem common to the old design.
NEW!!! Air Injection Tube/ Pipe, 20R & 21R. This part attaches to the exaust manifold
(part of the EGR system from the smoge air pump to the exaust manifold), often rusts out. $157.80
NEW!!! EGR Air Injection Check Valve (for above tube) OEM part. Part of the EGR system from the smog air pump to the exhaust
manifold. One way flow valve prevents back flow pressure from exhaust manifold. $85.62
Entire Aluminum Rocker Assembly, come with rocker shafts and all! Original Toyota remanufactured for 22R, 22RE motors. * $170.10Super Strong Head Bold (Stud) Kit. Replace your old stock head bolts with these upgraded stronger studs and nuts for 20R, 22R and 22RE motors.
*Please note: A $60.00 core charge must be added to the price above and is refundable in exchange for your old rocker assembly.
Your head will now slide down on these studs then fasten with nuts (like a funny car motor). Cylinder head stud kits are precision centerless-ground and thread-rolled to Mil-S-8879 specs (many times stronger than OEM). Their black oxide finish protects them from wear and corrosion, and ARP throws in hardened parallel washers for uniform load distribution and accurate torque readings.$164.34
Super Strong Crank Shafts Main Bearing Bolts (stud) Kit. For 20R, 22R and 22RE motors. These main studs are made from 8740 chromemoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs (many times stronger than OEM), with a black oxide finish for corrosion resistance. The kits come complete with ten studs, hardened washers and high-strength hex nuts. $105.46
Super Strong Fly Wheel Bolts. For 20R, 22R and 22RE motors. These high performance flywheel bolts are forged from an aerospace alloy and heat-treated before machining and thread rolling. They have a larger-than-stock shank diameter for improved flywheel register, and are rated at 170,000 psi. $53.17
Sway Bar bushings, Landcruiser (Front) from 1988-1989, Landcruiser (Rear) from 1985-1987, and
Pick-up (Front) from 1980-1983. $20.00 pair
Electric Fuel Pump Kit After market (mounts inside gas tank like original, similar design) Toyota pickup 1975 to 1979 20R engine. $101.45
Electric Fuel pump After market. For carburated cars only. Mounts externally, comes with instructions (fuel pressure 4.5 psi out put) A low cost alternative to replacing the original fuel pump $56.42
Clutch slave cylinder, Toyota Truck 1975-80 $34.96
Cool Look!! Distributor Electronic Conversion Kit for all Toyota 4 cylinder Single Point type motors 1971-1977
NEVER CHANGE POINTS AGAIN! Saves gas and extends the life of your spark plugs. Come with a magnetic pick up you screw inside the distributor. This kit eliminates the unreliable points that ware and constantly change the ignition timing. With this kit you just set it and forget it!!!! Its is easier to install than as a set of points but you only do it once! Entire ignition system fits beneath distributor cap to maintain original look. No alteration to distributor required. Use on vehicles with points-type ignition. CARB EO #D-57-1. $123.00
Entire Electronic Distributor for 20R motor $184.28
Ignitor Box Booster (aftermarket) multiple spark ignition control for primarily stock applications. Gives a better more powerful spark at any rpm. These inductive discharge ignitions I sell are designed to produce a series of sparks below 3,000 rpm, instead of just one. This ensures that fuel is burned completely, providing more power, smooth idle, quick starts, and overall drivability improvements. This ignition boxe can be triggered using points. Comes with wires connectors and detailed instructions. Price $149.76 This unit will not work with distributors with magnetic pick ups. See other unit listed below for cars with magnetic pick ups.
A REAL GAS SAVER!!! Ignitor Box, Multiple Spark Discharge Ignitions System. Can be used to Eliminates the ignitor unit that is located on top of the ignition coil and give a better more powerful spark at any rpm. The original Toyota ignitor is discontinued new and sold for close to $300.00 Whether you have a powerful street machine, daily stock driver or trick Street Rod, the multiple sparks of the 6A CD ignition will ensure complete combustion. Bolt one on and look for quicker ETs, easier starting, reduced plug fouling, quicker revving, more power, and increased fuel economy. This work with virtually any 4, 6, or 8-cylinder vehicle with a distributor, This unit can be triggered by breaker points, magnetic pickup, or the output of an electronic amplifier.
$228.75 standard unit
$288.75 with special motor saving adjustable rev limited built in.
Ignition Coil Upgrade Blaster coil 15,000 more volts than stock.
Blaster coils put out 45,000 volts, which are 15,000 more than stock.
They also have an oil-filled metal canister and will fit stock mounting brackets. $56.58
Brake Master Cylinder complete assembly for Toyota Stout (truck) $113.62
NEW!!!Filter Kit For A40 Automatic Transmission Comes with filter and gasket $23.19
-------------------
Cooling
System:
Get about 3-6 extra HP by eliminating the original, heavy belt driven clutch fan just by installing this kit.
Can be wired up to operate manually or automatically with the additional kits listed below. Price $144.38
Thermostatic Fan Switch for above fan kit. Automatically turns on fan when engine temperature reaches 185 degrees Fahrenheit. $72.48
Thermostatic Fan Switch Adjustable. Same as above but can be adjusted to switch on from 140 to 200 degrees Fahrenheit $93.67
New!!! New!!! Upgraded Aftermarket High Performance Polyurethane Chassis bushings. Save money, cheaper than buying original type bushings!!! Better than the originals and last forever. For your daily driver or racer. Upgrade those old worn out, dry rotted rubber bushings to better the ride, handling and safety of you vehicle. Click here for pricing or to inquire.
Click here for Performance Parts
I do business by email!
*Prices do not include shipping.
If you would like a price quote with shipping please send your zip code along with a list of item you are interested in buying.
My Payment
Options:
I accept all major Credit Card payments through PAY PAL.com ONLY (owned by
Ebay).
It is the #1 online payment service in the world. They are safe,
secure and the
fastest way to get items paid for instantly and shipped to you.
Pay Pal now accepts many Currencies from around the world.
Paying is easy. I can send an invoice via email through Pay Pal, the
email-invoice
will take
you through the easy steps to pay instantly online with a few clicks.
It does not cost
anything to sign up.
See them at: https://www.paypal.com/
NEW !!! Through Pay Pal I can now receive payments in five currencies: U.S. Dollars, Canadian Dollars, Euros, Pounds Sterling, and Yen. Click here to see if Pay Pal is available in your country.
I
SHIP WORLD
WIDE !!!
Please
contact me by email for any additional questions regarding other
payment
options
Thank you for visiting
Toyhead Auto Restoration Services!
Philadelphia, PA. USA
The best way
to contact me is by email
!!! Send Email
to: rick@toyheadauto.com