Toyhead Auto Restoration Services

Weatherstrip:

Door Glass Channel Weatherstrip (aftermarket) fits Corolla Coupes  TE27,  KE25, 9/70 to 7/74 (sold in pairs of 2 only) $85.21 pair. Special order.

Door Glass Channel Weatherstrip (aftermarket) fits Corolla KE30, KE36, TE31, 6/75 to 8/79 (sold in pairs of 2 only) $153.76 pair. Special order.
-----------

Door Glass Belt molding, Inner, Corolla 5/70 to 7/74,  KE2#, TE2#
(out side trim with rubber strip at the top of the door that contacts the door glass like a squeegee when it goes up and down).  $17.67 each.

Door Glass Belt molding, Outer (aftermarket), fits Corolla Coupes  TE27,  KE25, 9/70 to 7/74 $35.00 each.  Special order.

Door Glass Belt molding, Outer, Corolla 5/70 to 7/74 KE20, TE21, Standard model (out side trim with rubber strip at the top of the door that contacts the door glass like a squeegee when it goes up and down).  $19.76 each.

Front Door Glass Belt molding, Outer, for 4 door Corolla TE72 8/79 to 8/81 ) $26.40 each.

Front Door Glass Belt molding, outer, (out side trim with rubber strip at the top of the door that contacts the door glass like a squeegee when it goes up and down) Corolla 8/81 to 7/83 AE71, TE72, 4 door  $25.26 each.

Door Glass Belt Molding, Inner, Corolla  AE86, 8/83 to 7/87 (out side trim with rubber strip at the top of the door that contacts the door glass like a squeegee when it goes up and down) $34.96 each.

Exterior / Body:

Interior:

Engine Compartment, Suspension, Drive train and More:

NEW! Igniter Box (aftermarket) multiple spark ignition control for primarily stock applications. 
Replaces the ignitor unit that is located on top of the ignition coil to give a better more powerful spark at any rpm.
The original Toyota ignitor is discontinued new and sold for close to $300.00  These inductive discharge ignitions are designed to produce a series of sparks 
below 3,000 rpm, instead of just one. This ensures that fuel is burned completely, providing more power, smooth idle, quick starts, and overall drivability improvements. These ignitions boxes can be triggered using points or the electronic distributors.  Comes with wires connectors and detailed instructions.
Price $149.76

NEW! Ignitor Box, Multiple Spark Discharge Ignitions System.
Eliminates the ignitor unit that is located on top of the ignition coil and give a better more powerful spark at any rpm. Whether you have a powerful street machine, daily stock driver or trick Street Rod, the multiple sparks of the 6A CD ignition will ensure complete combustion. Bolt one on and look for quicker ETs,
easier starting, reduced plug fouling,  quicker revving, more power, and increased fuel economy. This work with virtually any 4, 6, or 8-cylinder vehicle
with a distributor, This unit can be triggered by breaker points, magnetic pickup, or the output of an electronic amplifier.
$228.75 standard unit  
$288.75 with special motor saving adjustable rev limited built in.

Ignition Coil Upgrade Blaster coil 15,000 more volts than stock.  Blaster coils put out 45,000 volts, which are 15,000 more than stock.
They also have an oil-filled metal canister and will fit stock mounting brackets. $56.58

NEW!!! Coil Springs, suspension standard height springs and high performance lowering springs for street and racing. 
For Corolla 1970 to current year (front or rear). $165.56 per pair. Click here for more information.

Front Strut Mounts Corolla 1970 to 1981  $48.99 each.

Pitman Arm (Steering) Corolla 1970 to 1974 $61.76

Wheel Bearing / Front Hub Kit. These are the two bearing that mount inside the front rotors. One kit does one side of the car. Contains inner and outer bearings. $37.91

Electric Fuel pump After market. Mounts externally, comes with instructions (fuel pressure 4.5 pi out put) A low cost alternative to replacing the original fuel pump $56.42

Starter (rebuilt) all motors $70.00* 
* A $20.00 core charge must be added to the price and is refundable in exchange for your old starter.

Carburetors (manufacture rebuilt with 90 day warranty) for Corolla all $175.00*
 * A $45.00 core charge must be added to the price and is refundable in exchange for your old carburetor.

Motor Mounts, Corolla 8/84 to 7/87, AE86, 4AGE motor, OEM.  $51.57

Brake Master Cylinder Corolla 8/74 to 8/79 1.6 2TC motor $65.58

NEW! Front Control Arms Rebuild Kit.  Includes 2 quality heavy duty ball joints with serviceable grease fittings
and upgraded polyurethane control arm bushings with steel center tubes to do both front control arms. $124.17

Upgraded Aftermarket High Performance Polyurethane Chassis / Suspension Bushings. Save money, cheaper than buying original type bushings!!!  Better than the originals and last forever.  For your daily driver or racer.  Upgrade those old worn out, dry rotted rubber bushings to better the ride, handling and safety of you vehicle. Click here for pricing or to inquire.

Timing Gear Complete Set for 2T, 2TC, 2TB motors Includes Camshaft Sprocket, Crankshaft Sprocket, Oil Seal, New tensioners, 
Guide Rail, Gaskets (not shown) and timing Chain. These are high quality sets for running long and hard. 
$117.64

Oil Pump for Corolla 2TC, 3TC Engine $171.60

Transmission Input Shaft Bearing Fits Corolla TE72, 8/79 to 6/81 5 speed manual transmission. $27.09

Windshield Washer Fluid Reservoir (bottle) for a Toyota 2001 to 2004 Corolla $115.27

High Performance 6.7" Ring and Pinion Gear sets.
For Corolla AE86, 1984 to1987 with RWD 6.7 inch ring and pinion gears.   The variety of gear you want to really make your car leap forward from a stand still and gives the car better response when accelerating out of turns. Gear for better top end speed, good for street, quarter mile drag, autocross and circle track.  Price *$436.73

*Available Ring and Pinion Ratios are:

2.50:1
2.93:1
3.30:1
3.42:1
3.73:1
3.90:1
4.10:1

NEW SALE PRICE !!! Limited Slip Differential for Corolla AE86, 1984 to1987 with RWD 6.7 inch ring and pinion.
gears.,  This heavy duty LSD is perfect for street, racing and drifting.
Allows both rear wheels to drive and put all the power to the ground unlike the stock OEM differential which only drives one rear wheel.
You will notice better acceleration and traction especially coming out of a turn.  
This unit can also be used for the Legend Cars Racing Series and is and excellent choice and advantage over a locked spool to get the power to the ground. $1025.00

Parts below are all needed to rebuild the rear differential For Corolla AE86, 1984 to1987 with RWD 6.7 inch ring and pinion gears.
Click Here For Tips on Rebuilding Toyota Celica 6.7 inch Rear Differentials

Rear Differential Pinion Seal (Seal behind flange where the drive shaft mounts) $19.24

Differential Carrier Bearings and Race/Cup $114.00 set of 2

Rear Axle Seals $15.81 pair

I do business by email!

*Prices do not include shipping. 

If you would like a price quote with shipping please send your zip code along with a list of item you are interested in buying.

My Payment Options:

I accept all major Credit Card payments through PAY PAL.com ONLY (owned by Ebay).
It is the #1 online payment service in the world.  They are safe, secure and the
fastest way to get items paid for instantly and shipped to you.
Pay Pal now accepts many Currencies from around the world.

Paying is easy. I can send an invoice via email through Pay Pal, the email-invoice will take
you through the easy steps to pay instantly online with a few clicks. It does not cost anything to sign up.
See them at: https://www.paypal.com/

NEW !!! Through Pay Pal I can now receive payments in 23 currencies: Click here to see if Pay Pal is available in your country.

I SHIP WORLD WIDE !!!
Please contact me by email for any additional questions regarding other payment options

 rick@toyheadauto.com

I accept Western Union Payments
Available In Many Countries, Click Here For More Info.

Thank you for visiting Toyhead Auto Restoration Services!
Philadelphia, PA. USA

The best way to contact me is by email !!!  Send Email to: rick@toyheadauto.com